Email: info@jeetekno.com
Email: info@jeetekno.com
Conserve Forest & Wildlife
A close fitting hard shell case suitable for Bat4 and Bat5.
A close fitting hard shell case suitable for Bat4 and Bat5.
D1000X Ultrasound Detector
The D1000X is a professional ultrasound detector, based on the latest technology. The detector has heterodyne, frequency division and time expansion systems and also a built-in 16-bit recording system using a Compact Flash card as storage medium. It is equipped with our well-known, high-quality capacitance microphone which has been further improved to give lower noise, wider dynamic range and lower distortion.
The D1000X has a built-in “recorder”, relieving the user from the hassle of operating a separate recording device or laptop with connecting cables. It can be configured to work in a variety of operating modes, but thanks to the use of “Profiles”, switching between different modes is made instantly. Each profile contains all the selectable settings such as sampling rate, triggering mode, time expansion factor and LED intensity and can be prepared in advance and saved in the detector.
At any time, either the direct ultrasonic signal, the heterodyne signal or the frequency division signal can be recorded onto the CF-card. Spoken comments can be recorded by speaking into the microphone while recording in the direct mode, or in a special comment recording mode (at a lower sampling rate). The recording time is limited only by the available space on the CF-card. Upon completion of a recording in the direct mode, the signal will be automatically replayed in time expanded form, if this function is enabled. Time expansion factors from 1 (original speed) to 30 can be chosen. The recordings can be made by manually starting and stopping the recording or through level-activated (and optional frequency selective) triggering. In the latter case, the detector can be set up for unattended capture of calls. Pre- and post-triggering modes with a variety of different settings can be used.
The wav sound files on the CF-card are stamped with date and time and can be read directly on a PC, using a standard CF-card reader. The D1000X also has a serial GPS input, making it possible to save GPS position data in the files.
D500X Ultrasound Detector/Recorder Mk II
The D500X Mk II is as easy to use and provides the same features as the classic D500X, with the following exceptions:
The D500X is an ultrasound recording unit intended for long-term, unattended recording of bat calls. In contrast to time expansion bat detectors, the D500X records full-spectrum ultrasound in real time with virtually no gaps between recordings. The recorder is equipped with four slots for CF cards, which typically makes it possible to leave the unit in the field for more than a month. The triggering system allows the device to automatically start recording as a sound is detected.
Weight | 1300 g |
Dimensions | 165 × 170 × 53 mm |
Class | Direct, high-speed recording |
Microphone | Advanced electret, jack for external microphone |
Frequency range | 15 kHz – 190 kHz (500 kHz sampling rate, high-pass filter enabled) 5 kHz – 190 kHz (500 kHz sampling rate, high-pass filter disabled) |
Connections | External microphone, external trigger, external DC supply |
Timer | Four on/off periods per day |
Batteries | 4 x AA size, Alkaline or NiMH recommended |
External DC supply | 5.5-8 V, typically ca. 200 mA (average, when recording), depends on CF card type and number of CF cards |
Recording | ADC Resolution: 16 bits Anti-aliasing filter: Yes, 8th order, 190 kHz cut-off frequency Sampling rates: 44.1, 300, 500 kHz (optimized for 500 kHz) Recording length: 0.3, 0.5, 1, 2, 3, 5, 10, 20 sec or manual recording Recording medium: CF card, 4 slots |
D100 Ultrasound Detector
Pettersson Elektronik, Sweden
Type: | Heterodyne |
Microphone: | Electret + ceramic |
Frequency range: | 10 – 120 kHz (min.) |
Bandwidth: | 8 kHz (+/- 4 kHz), -6 dB |
Battery: | 1 x IEC 6LF22 (9 V) |
Quiescent current: | 16 mA typ. |
Size: | 113 x 71 x 33 mm (113 x 71 x 63 mm including knobs) |
Weight: | 220 g including battery |
Outputs: | 2 x 3.5 mm jacks for headphones and recorder |
AudioMoth
It is a low-cost, open-source acoustic monitoring device used for monitoring wildlife. AudioMoth is not only sensitive to audible sounds but well into ultrasonic frequencies. It records uncompressed audio onto a micro SD card from 8,000 to 384,000 samples per second.
This units can be programmed to monitor wildlife populations by recording the calls of specific target species. Furthermore, it can serve as an alert system detecting sounds of human exploitation, such as the blast of a shotgun or the roar of a chainsaw.
A popular research tool for environmental and biodiversity researchers worldwide. Most importantly you can now find unattended AudioMoths in some very unexpected places such as rain forests, jungles, and bat caves worldwide.
KEY FEATURES:
• EFM32 Gecko processor
• Capable of recording at sampling rates of up to 384kHz
• Records uncompressed WAV files to microSD card
• Powered by 3 x AA batteries
• With Analog MEMS microphone
• Analog pre-amplifier with adjustable gain
• Measures just 58 x 48 x 15 mm
• Configurable USB interface
• Also Onboard real-time clock keeps track of time
• Comes with a plastic bag to prevent damage by moisture
Moreover Units from LabMaker come with the firmware already installed. Batteries, microSD card and USB cable not included.
https://www.labmaker.org
Specifications:
These are just some of the technical specifications, for more information check the manual of the BATLOGGER WE X.
Field of application | Wind turbine monitoring |
Audio/Recording | |
Acoustic signal processing | Real time 16bit-full spectrum |
Type of microphone | BATLOGGER X Microphone |
Number of microphones | 1, 2 or 4 |
Sensitivity range | 10–150kHz |
Trigger function | yes |
Scheduler | yes, adjustable, with sunset/sunrise times |
Automatic microphone test | yes |
Storage | Internal hard disk (for approx. 100GByte user data) |
Datatransfer | BATLOGGER Connect cloud synchronisation SD/SDHC/SDXC cards (SD 2.0), max. 128 GB, FAT32 formatted external hard disk via USB port, FAT32 or ext4 formatted USB stick formatted via USB port, FAT32 or ext4 |
Operation | |
Display | Status LEDs |
Interface | Webinterface |
Connectivity | BATLOGGER Connect Remote monitoring, configuration and data synchronisation |
Cellular radio | 4G LTE (Europe/APAC or N. America) |
Sensors | |
Temperature | yes |
Humidity | 0 .. 100% RH relative humidity ± 3% RH (max), 0–80% RH |
Air pressure | 500 hPa .. 1100 hPa Measuring range absolute air pressure Calibratable to relative air pressure of the location Accuracy relative air pressure ±0.5 hPa (-10 .. 50°C) |
Casing | |
Size (WxLxD) | 250 x 200 x 100 mm |
Weight | 2.04kg |
Protection class | IP30 |
Operating conditions | 0… 45°C 10..90 %RH (non-condensing) Charging mode: 0..+40°C |
Power | |
Power supply | 100-240 VAC, (12 VDC 30W) |
Operating time | ∞ |
D200 Ultrasound Detector
Small and low weight heterodyne detector with backlit, large digit, accurate digital display, showing the tuned frequency. The frequency and volume controls are on the side of the case, making it easy to adjust.
Type: | Heterodyne |
Microphone | Electret |
Frequency range: | 10 – 120 kHz (min.) |
Display accuracy: | +/- 0.15 kHz |
Bandwidth: | 8 kHz (+/- 4 kHz), -6 dB |
Battery: | 1 x IEC 6LF22 (9V) |
Quiescent current: | 17 mA typ. including LCD backlight |
Size: | 119 x 60 x 25 mm including knobs |
Weight: | 150 g including battery |
Outputs: | 2 x 3.5 mm jacks for headphones and recorder |
Anabat Scout Active Bat Detector
The Anabat Scout is an affordable, full spectrum bat detector designed specifically for active bat monitoring.
Titley Scientific have developed a bat detector tailored to your active survey needs. The Anabat Scout is an easy-to-use unit that can play heterodyne, auto-heterodyne and frequency division audio through earphones or the built-in speaker. But it’s not limited to live listening, you can record full spectrum and zero crossing files to an SD card, with every file geo-tagged. You can even record voice notes to the SD Card.
The Scout’s features don’t end with acoustics, it also has an in/out bat counter which time stamps and geotags every count. It is robust and ergonomically designed, and comes with a protective carry pouch with belt loop and lanyard. For those on the go, use the Scout in transect mode with the built-in GPS so you can save your track. When you get back to the office, you can analyse and view your files on a map with your track using the free Anabat Insight software.
Titley Scientific knows you like to work in the dark, the small black OLED display isn’t distracting, only giving you the crucial information, and can be operated in bright or dim modes. The glow-in-the-dark buttons means that you can find and operate your detector even on the darkest night without your headtorch!
Features:
The new Magenta Bat5 Digital Quartz Bat Detector has a backlit 4 digit LCD frequency display, a high stability, easily tuned local oscillator and advanced amplification and filtering circuits.The microphone is a low noise analogue MEMS device with an extended high frequency range.
Specifications:
These are the specifications of the BATSCANNER
Field of application | Mobile bat detecton |
Audio | |
Acoustic signal processing | Heterodyne conversion |
Type of microphone | Electret-condenser |
Number of microphones | 1 |
Sensitivity range | 15–120kHz |
Live monitoring | Heterodyne |
Trigger function | yes |
Audio out | 3.5mm plug / speaker |
Manual peak frequency selection | yes |
Operation | |
Display | 7-Segment LED |
Interface | Push-buttons |
Casing | |
Size (WxLxD) | 62 x 120 x 27 mm |
Weight | 145g |
Protection class | Not waterproof |
Power | |
Power supply | 3x 1,5 V batteries type AAA |
Operating time | 20-25h |
The Apodemus Pipistrelle Mini is a compact, cost-effective handheld bat detector designed for enthusiasts and beginners alike.
Equipped with automatic heterodyne tuning and real-time expansion, this device provides an accessible yet advanced introduction to bat detection. While its sensitivity and resolution are more modest than premium detectors, its time expansion mode enables you to analyze bat calls in a way previously only possible with expensive detectors, offering a new level of acoustic insight.
Key Features:
© 2019-24, All Rights Reserved By Jeetekno.
Other website : Sherman Trap
Other website : Tomahawk Trap
Other website : Increment Borer
Reviews
There are no reviews yet.