Mist Net Thread Cutter
SKU: THREADCUTTER
One (1) tool for cutting individual threads of netting, when necessary, to safely extract wildlife. Very easy to grip with long flat handle.
Colors may vary.
Mist Net Thread Cutter
SKU: THREADCUTTER
One (1) tool for cutting individual threads of netting, when necessary, to safely extract wildlife. Very easy to grip with long flat handle.
Colors may vary.
D500X Ultrasound Detector/Recorder Mk I
The D500X is an ultrasound recording unit intended for long-term, unattended recording of bat calls. In contrast to time expansion bat detectors, the D500X records full-spectrum ultrasound in real time with virtually no gaps between recordings. The recorder is equipped with four slots for CF cards, which typically makes it possible to leave the unit in the field for more than a month. The triggering system allows the device to automatically start recording as a sound is detected.
| Weight | 1200 g |
| Dimensions | 165 × 170 × 53 mm |
| Class | Direct, high-speed recording |
| Microphone | Advanced electret, jack for external microphone |
| Frequency range | 15 kHz – 190 kHz (500 kHz sampling rate, high-pass filter enabled) 5 kHz – 190 kHz (500 kHz sampling rate, high-pass filter disabled) |
| Connections | External microphone, external trigger, external DC supply |
| Timer | Four on/off periods per day |
| Bandwidth | 8 kHz (+/- 4 kHz), -6 dB |
| Batteries | 4 x AA size, Alkaline or NiMH recommended |
| External DC supply | 5.5-8 V, typically ca. 200 mA (average, when recording), depends on CF card type and number of CF cards |
| Recording | ADC Resolution: 16 bits Anti-aliasing filter: Yes, 8th order, 190 kHz cut-off frequency Sampling rates: 44.1, 300, 500 kHz (optimized for 500 kHz) Recording length: 0.3, 0.5, 1, 2, 3, 5, 10, 20 sec or manual recording Recording medium: CF card, 4 slots |
Specifications:
These are the specifications of the BATSCANNER
| Field of application | Static bat detecton |
| Audio | |
| Acoustic signal processing | Heterodyne conversion |
| Type of microphone | Electret-condenser |
| Number of microphones | 1 |
| Sensitivity range | 15–120kHz |
| Live monitoring | Heterodyne |
| Trigger function | yes |
| Audio out | Speaker” |
| Manual peak frequency selection | no |
| Operation | |
| Display | LED |
| Interface | Push-button |
| Casing | |
| Size (WxLxD) | 130 x 130 x 78 mm |
| Weight | 350g |
| Protection class | IP66 |
| Power | |
| Power supply | 12 V DC to 18 V DC, min. 5W |
In principle, the eight AA batteries in the BatCounter are only used to test the device or to count over very short periods of time (e.g. a few nights). If you wish to use the BatCounter over longer periods, it is recommended that you connect to a 12-volt battery or the 1110/ 220-volt electricity network. The kit contains the following parts: – 110/ 220V BatCounter External Power Adapter – BatCounter External Power Cable.
Technical specifications
Anabat Express Passive Bat Detector
The Anabat Express is easy to use, with a built-in GPS making deployment faster and simpler.
Designed for low power and efficient zero crossing recording in a compact, waterproof and easily-concealed case. The Anabat Express can be used anywhere and is extremely fast to deploy and download. It runs for around 14 nights* on readily available AA batteries. Choose between omni-directional or directional weather-resistant microphones, which can be plugged into the case or onto an extension cable. The transect mode means you can track your mobile transects with GPS logs every second. The Express will quickly become your favourite detector for passive monitoring.
Features:
Includes:
Carrying case,1.5m Microphone Extension Cable, USB cable and magnet lanyard for checking status. Please note microphones, SD Cards and batteries are sold separately.
D240x Ultrasound Detector
Very popular heterodyne and time expansion detector with backlit, large digit, accurate digital display, showing the tuned frequency in the heterodyne mode. The frequency and volume controls are on the side of the case, making it easy to adjust. Using stereo headphones, the heterodyne signal is heard on the left channel and the time expansion signal on the right channel. When the built-in speaker is used, a switch is used to select the heterodyne or time expansion signal.
A digital recorder can be connected to the D240X to record the time expanded calls for analysis on a PC. If the recorder has a “voice activated” recording mode, a fully automatic bat recording system is obtained, which can be left in the field for unattended recording of bat calls.
| Weight | 170 g |
| Dimensions | 119 × 60 × 25 mm |
| Type | Heterodyne and time expansion (x10 or x20 – selectable via switch) |
| Microphone | Advanced electret |
| Frequency range | 10-120 kHz (min.) |
| Display accuracy | ± 0.15 kHz |
| Bandwidth | 8 kHz (+/- 4 kHz), -6 dB |
| Battery | 1 x IEC 6LF22 (9V) |
| Quiescent current | 30 mA typ. (replay) including LCD backlight |
| Comment switch | Yes |
| Memory size | 1M x 8 |
| Sampling frequency | 307 kHz |
| Resolution | 8 bits |
| Storage time | 3.4, 1.7 or 0.1 sec. (selectable via switch) |
| Trigger modes | Manual, level – broadband, level – narrowband |
| Pretrigger | 50% of the selected storage time |
| Outputs | 2 x 3.5 mm jacks for headphones and tape recorder |
| Miscellaneous | Overload indicator, adjustable input gain, replay of signal in memory through heterodyne system |
Pliers
Suitable for small aluminium and plastic ring removal.
Remove unwanted closed aluminium and closed plastic leg bands.
A good tool to have available for the removal of closed aluminium and plastic bird leg rings.
Suggestions on how to removed closed leg bands.
Be careful, bird legs can easily be broken. It can help to have someone else hold the bird, while another concentrates on safely removing the band with two free hands.
Create room for the cutter to grip the band by holding the band away from the leg.
Use a smooth action without twisting the band against the leg. Cut one side of the band, then turn the band to make a second cut on the opposite side of the band.
BatLure External Speaker
The newest addition to the Batlure family
AudioMoth
It is a low-cost, open-source acoustic monitoring device used for monitoring wildlife. AudioMoth is not only sensitive to audible sounds but well into ultrasonic frequencies. It records uncompressed audio onto a micro SD card from 8,000 to 384,000 samples per second.
This units can be programmed to monitor wildlife populations by recording the calls of specific target species. Furthermore, it can serve as an alert system detecting sounds of human exploitation, such as the blast of a shotgun or the roar of a chainsaw.
A popular research tool for environmental and biodiversity researchers worldwide. Most importantly you can now find unattended AudioMoths in some very unexpected places such as rain forests, jungles, and bat caves worldwide.
KEY FEATURES:
• EFM32 Gecko processor
• Capable of recording at sampling rates of up to 384kHz
• Records uncompressed WAV files to microSD card
• Powered by 3 x AA batteries
• With Analog MEMS microphone
• Analog pre-amplifier with adjustable gain
• Measures just 58 x 48 x 15 mm
• Configurable USB interface
• Also Onboard real-time clock keeps track of time
• Comes with a plastic bag to prevent damage by moisture
Moreover Units from LabMaker come with the firmware already installed. Batteries, microSD card and USB cable not included.
https://www.labmaker.org
We are dealing in forestry and wildlife equipment.
Reviews
There are no reviews yet.