Product Details
Wildtronics Mini Stereo PIP Microphone
Wildtronics Mini Stereo PIP Microphone
Low noise, matched stereo pair microphone, powered by PIP, for Pro Mini or All Purpose Parabolic Kits.
The Wildtronics Mini Stereo Microphone is a low noise, high sensitivity stereo microphone powered by plug-in-power. Buy yours today, and it will normally ship the next day!
- Low noise, matched stereo pair microphone, powered by PIP (plug-in-power).
- Obtain in-dish Stereo effects with the Pro Mini or All Purpose Parabolic dish.
- Fits the Pro Mini or All Purpose Parabolic Kits
- Only 12dBA self noise mic elements!
- 80 PPI (pores per inch) Pro Grade Windscreens.
- Fully shielded, machined aluminum core, for EMI/RFI suppression.
- Gold plated Neutrik 3.5mm stereo jack.
- Weighs 2.2 ounces
- Replaceable, 6 foot, 3.5mm stereo cable, with gold plated connectors, included.
Description
The Wildtronics Mini Stereo PIP Microphone easily assembles into our Pro Mini or All Purpose Parabolic Kits. When mounted in the Parabolic Kits, this microphone provides an in-dish stereo effect with gain and a field of view of 40 degrees for the Pro Mini and 20 degress for the larger All Purpose Parabolic kit. If you ever wanted a stereo parabolic kit, this is what you have been waiting for. Small and lightweight, this combination gives a nice stereo presence that isn’t too narrow, and helps block unwanted sounds from the rear. If you want improved, controllable, wide angle stereo and a strong mono parabolic response, review the innovative Wildtronics Pro Mono-Stereo Parabolic Microphones.
The Stereo PIP microphone requires a recorder and or camera, that has a 3.5mm input with 2-5 volt PIP, or Plug-in Power. The Stereo PIP microphone is designed to directly fit into the hub of the Pro Mini Parabolic Kit or the Mic Tube of the All Purpose Kit. Just insert it all the way in to set the microphone at the usual focal point of the parabolic dish. Align the mic so that it is oriented vertically and tighten the thumbscrew. The Red washer near the mic indicates the Right channel. The Stereo PIP weighs 2.2oz. It has a good 12dBA noise floor, and built-in pro grade windscreens. You may also slip over the windscreen that comes with the kits for added wind protection. The mic has a machined aluminum core, completely shielding it from EMI/RFI interference, and has a gold plated, Neutrik 3.5mm stereo jack. A 6 foot, 3.5mm cable, with gold plated connectors, is included. The reason why we use a detachable cable is because cables are the number one reason for microphone failure. You may also want different length cables for different applications. You can inexpensively replace the cable anytime.
The microphone elements in this mic are designed to be used with 2-5 volt PIP voltage supplies which are found in most handheld recorders and cameras. Most smart phones only use 1-1.5 volt PIP supplies and will have a very reduced output. These elements are very high output, so almost any 3.5mm input recorder will produce a nice clean recording with little noise. The Max SPL rating for the microphones is 110dB. That is on the lower side for max SPL compared to many microphones, so it is not recommended for very loud sounds.
Reviews
There are no reviews yet.